N3K-C3164Q-40GE Cisco Nexus 3164 64 x 40GBE QSFP+ ports

N3K-C3164Q-40GE Cisco Nexus 3164 64 x 40GBE QSFP+ ports


  • $600.00
    Unit price per 
Shipping calculated at checkout.

The Cisco Nexus 3164Q Switch is an ultra-high density, power efficient, 10/40-Gbps switch designed for the data center. This compact, two-rack-unit (2RU) model offers wire-rate Layer 2 and Layer 3 switching on all ports. It runs the enhanced version of the Cisco NX-OS Software operating system, that also supports Nexus 9000 series switches. It provides customer comprehensive features while simplifying image management. The rich programmability features enable organizations to run today’s applications while also being prepared for the demanding and changing application needs such as big data, cloud, and virtualization.

The Cisco Nexus 3164Q (Figure 1) is a 40-Gbps Quad Small Form-Factor Pluggable (QSFP)-based switch with 64 Enhanced QSFP (QSFP+) ports. Each QSFP+ port can operate in native 40-Gbps or 4 x 10-Gbps mode, up to a maximum of 256 10G ports.

Device Type: Switch

Form Factor: Rack-mountable

Dimensions (WxDxH): 3.48x17x41x22.32in, 37lbs

Layer 2 Features:  4000 Private VLANs (PVLANs), Isolated ports and promiscuous ports, PVLAN on PortChannels and vPCs, Spanning Tree Protocol (IEEE 802.1w Rapid Spanning Tree (Rapid PVST+), IEEE 802.1s Multiple Spanning Tree (MST), Edge port and edge port trunk, Extensions: Bridge Protocol Data Unit (BPDU) guard, BPDU filtering, bridge assurance, loop guard, and root guard), VLAN Trunk Protocol (VTP) Versions 1 and 2 (v1 and v2): Transparent mode, MAC addresses: Static (Unicast and multicast), IEEE 802.1AB Link Layer Discovery Protocol (LLDP), User-configurable interface maximum transmission unit (MTU) and jumbo frames, Unidirectional Link Detection (UDLD)

Layer 3 Features:  IPv4 (Static routes, BGP, EIGRP and OSPFv2, VRF-Lite and VRF route leaking, HSRPv1 and v2, Virtual Router Redundancy Protocol (VRRP), Bidirectional Forwarding Detection (BFD), Dynamic Host Configuration Protocol (DHCP) relay, IPv6 (Static routes, BGP and OSPFv3, VRF-Lite and VRF route leaking, HSRPv6, DHCP relay)

BGP Enhancements: disable-peer-as-check: Routes learned from one node in one autonomous system (as) will be advertised to another node in the same autonomous system, allow-as in: Allow routes having their own autonomous systems in the autonomous system path (as-path) to be installed in the BGP routing information base (BRIB), best-as-path-relax: Allow paths received from different autonomous systems to be handled as multipath if theiras-path lengths are the same and other multipath conditions are met, best-as-path-relax: Allow paths received from different autonomous systems to be handled as multipath if theiras-path lengths are the same and other multipath conditions are met, transport connection-mode passive: Allow a passive connection setup only, remove private-as enhancements [no | default]: remove-private-as [all] [replace-as], MD5 authentication for prefix-based neighbors: Allow authentication for prefix-based neighbors, E-BGP next-hop is unchanged, IPv6 route updates over IPv4 peering, E-BGP scales to 192 peers with BFD, 64-way ECMP, User-configurable MAC addresses (16) on routed interfaces

Multicast Features:  IGMPv1, v2, and v3, IGMP snooping, Protocol-Independent Multicast (PIM) sparse mode (PIM-SM) and Any Source Multicast (ASM), Anycast Routing Protocol (Anycast RP), Multicast Source Discovery Protocol (MSDP)

Availability Features:  Single binary image across Nexus 9300 and Nexus 9500 Switches, Fault isolation per process, Process patching, Stateless process restart

Comprehensive Monitoring Features:  Cisco Generic Online Diagnostics (GOLD), Complete, bypass, on-demand, and health checks, Onboard fault logging (OBFL), Cisco Embedded Event Manager (EEM): Scheduler, monitor, and event manager, Integrated packet capture and analysis with Wireshark, Default SSD (chassis supervisor and ToR) for logging and data capture, SPAN, Source and destination on switch, ERSPAN, Ingress ACL filtering

Virtualization Support Features:  VXLAN gateway, VXLAN bridging

Security Features:  Ingress and egress ACLs using Layer 2, 3, and 4 fields (Extended ACLs, MAC addresses, port ACL (PACL), VLAN ACL (VACL), and routed ACL (RACL), Flexible ACL carving), ACL counters, Storm control (Broadcast, multicast, and unknown unicast), User-configurable Control-Plane Policing (CoPP), Authentication, authorization, and accounting (Challenge Handshake Authentication Protocol (CHAP), Password Authentication Protocol (PAP), Microsoft MS-CHAP, and MS-CHAPv2, Capability to disable role-based access control (RBAC) and use AAA server authentication, RBAC integration to replace privilege levels, Logging, Test parameters, VRF context support, LDAP support), RADIUS, RBAC, TACACS+

Interface Types:  Layer 2 switch port (Access and trunk - VLAN list and native VLAN tagged and untagged), Layer 3 routed, Loopback interface, Switched virtual interface (SVI), PortChannel (Static mode, IEEE 802.3ad LACP, Load balancing, Minimum number of links), Lay 3 port subinterface

QoS Features:  Up to 8 queues per port, Modular QoS command-line interface (CLI; MQC), ACL-based classification, Marking and classification (Differentiated services code point (DSCP) on switch, Class of service (CoS), CoS preservation for Remote Direct Memory Access (RDMA) over Converged Enhanced Ethernet (RoCEE)), Policing - Ingress, Explicit congestion notification (ECN), Weighted Random Early Detection (WRED), Priority flow control (PFC) with support for up to 3 PFC classes

Device Management Features:  POAP, Configuration rollback, Configuration session manager, FTP, SFTP, and TFTP client, Network Time Protocol (NTP) -  Client, peer, server, ACL, and authentication, Remote copy (RCP) and secure copy, (SCP) client, Remote monitor (RMON), Cisco Smart Call Home, Simple Network Management Protocol (SNMP) v1, v2, and v3, Syslog, Virtual terminal (vty), XML (Netconf), Secure Shell (SSH) v2 (client and server), Telnet (client and server), USB port, 100/1000 bps management port, Support for copy <file> start, Locator LED (beacon), Supported in Cisco DCNM LAN and Cisco Prime™ Infrastructure, Supported in Cisco networking plug-in for OpenStack,

Extensibility and Programmability Features:  Linux tools (Bash shell access, Broadcom shell access), Python shell, NX-API, Extensible Messaging and Presence Protocol (XMPP) client

Compliant Standards:  IEEE 802.1D Bridging and Spanning Tree, IEEE 802.1p QoS/CoS, IEEE 802.1Q VLAN Tagging, IEEE 802.1w Rapid Spanning Tree, IEEE 802.1s Multiple Spanning Tree Protocol, IEEE 802.1AB Link Layer Discovery Protocol, IEEE 802.3ad Link Aggregation with LACP, IEEE 802.3ab 1000BASE-T, IEEE 802.3z Gigabit Ethernet, IEEE 802.3ae 10 Gigabit Ethernet, IEEE 802.3ba 40 Gigabit Ethernet, RFC 2460 IPv6, RFC 2461 Neighbor Discovery for IPv6, RFC 2462 IPv6 Stateless Address Autoconfiguration, RFC 2463 ICMPv6, UL 60950-1 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1, GB4943, 47CFR Part 15 (CFR 47) Class A, AS/NZS CISPR22 Class A, CISPR22 Class A, EN55022 Class A, ICES003 Class A, VCCI Class A, EN61000-3-2, EN61000-3-3, KN22 Class A, CNS13438 Class A, EN55024, CISPR24, EN300386, KN24

We offer free FedEx Ground shipping to all our customers in the continental US. If you need more information on expedited or international shipping please see our Shipping & Returns page or ask us directly via phone, email or using our Contact Form page.

We Also Recommend